4-Hole Trapezoid Plastic Coffee Dripper, 2-4 Cups

This coffee dripper is made from food-grade Polypropylene (PP) plastic, a material with properties similar to polyethylene but with a very low density. It's popular for molding food containers because it's transparent, allowing you to see the contents inside, and is widely recognized as a safe food-grade plastic.

The top of the dripper is an oval shape, measuring 11 cm in length and 10 cm in width. The base is a standard circular shape designed to fit perfectly on a cup. Since the typical brewing water temperature is between 92-97°C, there is no risk of the plastic shrinking.

PP plastic has a melting point of 165°C, offering high heat resistance and sterilization capabilities at 100°C. However, using it outside of its intended purpose, such as boiling or steaming at temperatures over 165°C, may cause the plastic to shrink or melt.

How to Brew Ground Coffee with this Dripper:

1. Heat the water: Heat water until it's near boiling or at a temperature of 90°C or higher.
2. Prepare the filter: Unfold the coffee filter paper and crease the seam, then place it into the coffee dripper cone.
3. Add coffee grounds: Use a spoon to add ground coffee to the filter. Use approximately 10-12 grams of coffee for one cup, with about 120-150 ml of water.
4. Pour the water: Slowly and continuously pour hot water evenly over the coffee grounds. In about 1-2 minutes, you will have a fresh, great-tasting, and aromatic cup of coffee ready to drink.